Showing posts with label abilities. Show all posts
Showing posts with label abilities. Show all posts

Sunday, October 29, 2023

Sprouting ideas

That was a lot of information to process in that stream of consciousness that holds the key to this next layout. So let’s break it down.
A minimum gauge railway. So we are talking 7/8ths inch to the foot and 32mm gauge to represent an 18” gauge line.
The purpose of this railway is to transport materials and finished items around a smaller sized foundry. Items like signs, gear wheels, and window frames. 
The trains would be short, one or two wagons, Wagons would carry materials such as casting sand, patterns, perhaps coal and iron ore for the furnace as well.
A particular project I’m interesting in for scratch building is one of the foundry waste wagons/tippers like those built by Sir Arthur Heywood for his Duffield Banks works. One is preserved in the narrow gauge museum at Tywyn on the Talyllyn Railway. There are drawings by Mike Decker in Volume 1 of James Waterfield’s excellent study of the work of Sir Arthur. There was even a similar sort of wagon at on display at Llanberis.
Waste tipper wagon of some description at the National Slate Museum.
One absolute must for the rolling stock on the layout is that the wagons must run on curly spoke wheels, I find them very relaxing to watch as a wagon passes.
Even at rest, I find curly spoke wheels calming
With the concept solidifying, it’s time to start to take a look at what I’m getting myself into.
What have I got myself into?
Just what have I got myself into? This is an extremely sobering image. What you see here is my LocoRemote kit of “Pet”, driver Alf, and a couple of wagons that I made back when I first dabbled in 7/8ths. They’re all big. Alf himself is about 6” (150mm) tall. My standard T.L.U. (Train length unit) that I plan my layouts around will be 18” inches (450mm). I like trains to be able to travel several times their own length on a layout, three times is the minimum, four is better. At three TLU’s the baseboard should be four feet (1220mm) long. I’m getting my first inkling of the size involved. My visions of what I can fit in a micro layout space need to be re-evaluated as I start proper planning.


Monday, October 16, 2023

Tool Time

You will see the new name and web address for the blog and wonder what’s going on. 
Those with long memories, may remember that my first steps in large scale modelling were in 7/8ths inch to the foot scale. But I was overwhelmed by the size and details, and stopped working in the scale long before this blog even started. 
Now that my 16mm scale layout is ready to go to shows, and I’ve absorbed what I can do in 16mm scale. I felt the need to try my hand at some 7/8ths details. I don’t know why, I just felt the need to do this. 
I found some dimensions, and made a large screwdriver, using a couple of thicknesses of styrene rod. The handle was shaped with a file from 1.6mm rod, and the shaft from .75mm rod with the flat tip sliced off with a sharp blade. The end of the handle was drilled out with a tiny drill bit, the shaft inserted, and fixed with styrene cement. All this was done under the view from an Optivisor.
A scale 18” long large screwdriver
I had made a screw driver. I had made a flipping screwdriver! A pretty good looking screwdriver at that. Bolstered by this success, I tried a spanner, (wrench to my American friends). With just as acceptable results. This was cut and shaped from a 2 x 6mm strip. The camera eye is unforgiving in the image. But to me it looks great.
A big old spanner. One for about 3” nuts and bolts.
I’m making tools! I’m starting to feel pretty good, so I carried on. Another smaller screwdriver. The screwdrivers were actually easier than I thought. I followed this with a smaller spanner. Then a couple of crowbars (pry bars) followed. These were actually quite challenging, as the styrene strip was being heat bent almost as far as it would go. Then to finish it off, a Sledgehammer, which was an absolute piece of cake considering what I’d already made. 
A 7/8ths inch scale tool wagon?
After a break for the weekend visiting friends and running in a 5K (1st in my age group, thanks for asking) I added a wood clamp and a tool box. The wood clamp was measured from one that the friends we were visiting had weathering away in their front garden. The tool box is rather more conjectural being made to a size I thought appropriate of about 18” long. Eighteen inches in 7/8th’s is about 33mm. Sizes of items are difficult to get used to.
It was a conscious decision to make the jaws of the clamp open and offset
The tool wagon, it contains full size tools I don’t even own,
There we go, a selection of 7/8ths inch to the foot tools. Made just to see if I could do it. It certainly gives me a sense of achievement. The wagon the tools rest on is the first wagons made for my abandoned 7/8ths inch layout.





Monday, August 28, 2023

Riveting work

Just a short report today. As I’m packing and getting ready for our vacation in the U.K. starting on Sunday. I just booked a couple of tickets for return trips on the Ffestiniog and Tal-y-lyn railways for our days in North Wales. 
One detail that I’d decided to incorporate on the skip loading chute was rivets on the girders. Sixteen millimeter scale is large enough to warrant this level of detail. I had no idea what to use for the rivet heads, but a quick ask around some forums and tiny rhinestone jewels used for decorating fingernails was suggested. I bought a pack from Amazon. 7,200 of various sizes between 1 and 3mm for $8.99 should keep me going for a while.
I figured the easiest way to apply them is a dab of glue on the surface and then put them in police with tweezers. That was pretty much right. I also found that a scalpel to adjust the jewel to its correct spot was a good idea. After 30 minutes dabbing and adjusting I had one side of the loader started.
Can you see them? 
It’s certainly a fiddly job. But right now not too tedious. I certainly have plenty more to add. But it’s a good start. I also don’t doubt that someone, somewhere will tell me the correct pattern of rivet heads. But I don’t care. It creates a good effect, and that will do for me.

Monday, August 21, 2023

Day 27-28-29 Building the fiddle yard.

This was always going to be a tough one. I was dreading this more than anything. Adding the sector plate. Making something fit onto the end of the layout. It didn’t need to me much more than a foot square. In the end I went for 13” x 10” (330mm x 250mm). 
On the face of it it was a simple task. Build the frame, put a surface on it, (though that’s not entirely necessary, I just felt better putting one on) and set up the joining of it to the main section case.
Woodworking is never simple with me. You’ll recall my shock at competently building the case. The project used up all my good luck. It was downhill from here on.
Making the template for the fiddle yard end.
I shan’t recount the problems I had. Cutting wood to the correct length, getting the correct angles on the support struts. Even drilling holes for the screws was a problem. I stripped a couple of pozi-drive screwdriver tips and screws. I was at the point of quitting.
“If this screw doesn’t go in, problem free, this time. I’m quitting for the day” I was in the depths of despair. If the screw hadn’t gone in. I would likely have been in tears. Luckily it went in. It’s a shambolic piece of woodworking. But it is on there. Flat and level.
I hope you can’t see all the cock-ups.
I can console myself with the thought that the list of things to do on this layout is now so short, that the layout is almost finished. The wagon loading funnel needs rivets adding and painting, then it can be installed on the layout. Lots of detailing bits and pieces, (a never ending task). 
A system for the unloader needs to be devised. I know it can easily be done by hand. But I don’t know wether to do a hidden manual system or automatic tipping rail. I like to be “hands on” in operating the layout. I could do a simple hidden “pusher” to tip the wagon, or I could try to devise a more complicated system, where a figure could be seen to be tipping the wagon by hand. That would be neat. That would need some serious thought. 
Finally, the train cassettes need to be designed. I’d like an individual cassette to each train. One that could act as storage and protection away from shows, as well as during. I’ll probably have to design and make a few prototypes first. I have some ideas on this. On the strength of the past few days work, they certainly won’t be wooden ones. 

Tuesday, August 15, 2023

The next big step.


We all progress in this hobby. As we spend more time working on our layouts, we develop. We learn skills.  We become better at them, Then we learn new skills. Things that we thought impossible become easy. The bar becomes raised. Sometimes without even noticing it.
Then one day you do notice it. All the little steps amount to one big step. You’re left wondering how did I get here? 
It was only a few years ago that I learned how to make my own panel track seen in this image. That too was a big step preceded by lots of little steps.
In this image there are many of the little steps since then, that lead to this next big step. 
A 16mm scale Peter Binnie skip. This is a new scale to me. I actually don’t make many kits, and those I have started usually end up unfinished. I have half a dozen Slaters O scale wagon kits in such a state. This is a simple kit, little more than 10 parts so it got finished.
It’s battered and rusty. I don’t weather. I don’t trust myself. I don’t want to ruin really nice trains with some hamfisted dirty streaks. I buy R-T-R trains with weathering on them. The rim of the skip is banged up. As I don’t weather, I never thought about this before. This simple trick was suggested to me by another 16mm scale modeller. It’s a simple fix but it makes the wagon look like it’s been in service a while.
Static Grass. I have never used static grass until recently. While you were all covering your layouts with grass fibers from expensive, or even home built applicators. I was still in the last century using scatter materials. I had convinced myself that these fibers of grass were round whereas a blade of grass had width so the two couldn’t look the same. To a certain extent I still subscribe to that point of view. But the way those long fibers grow around the timber baulk buffer stop looks very pleasing.  
The timber baulk is distressed, something else I hadn’t thought about until recently all you have to do is drag a razor saw blade down it. That’s not hard.
Weeds. The weeds are the last step. I have no idea why I thought modelling individual plants was something I could do. After all, I had seen Roy C Link’s nettles in his Crowsnest Tramway book, and thought to myself. Never.
It just seemed at that moment something I wanted/needed to try. I remembered that I had made many tiny trees for my Hitsu and Gonou T scale layouts. It couldn’t be any more difficult than that. I made about half a dozen, Then another dozen, followed by 20 more. Now I have about 40 weeds, a mix of Goldenrod, Ragwort and Cow Parsley to plant. It’s probably not enough. They are individually identifiable plants. A new skill has been learnt. A new step taken. Strangely, I find myself wanting to model nettles now.
I started to plant a few weeds on the layout. Ragwort at the sand pit end because they like sand. I pushed the skip up against the timber baulk. Just to see what it looked like.
That’s how I got here.
Looking at the scene, and the image, made me pause. I was gobsmacked. Without realizing it I had just raised my bar. All those small steps and decisions have pulled together to create a whole. The scene has a sense of place, an atmosphere. To a certain extent I feel like I’m there. To be honest, I want to go over there and tip that rusty old skip bucket over. 
So I did.
 
So here I am. In a new place. A new realization that I can do whatever I put my mind to. I’m still a long way off the abilities of the true artists of the model railway world. But in my own way I think I’m with them. In spirit at least.






*Fy Merlen Bach*

Winter is coming…The phrase that spawned hundreds of cringeworthy internet memes. To me it means that any model making I do will be confined...